Decorate a Child’s Room With Basic Fabric Projects

You will find four easy projects you can do with cartoon character fabric that will customize your kid’s room and provide a lot of impact to get a little effort: Pillow Cases, Drapes, Bedspread covers, and Wall Hangings.

This article will provide instructions and other tips to help you decorate your child’s room with character fabric.

Pillowcases
There are two types you could make: The first is a typical pillowcase that you will slip the cushion into one end. The second is an envelope pillow case which has a fabric overlap on the back that will allow you to put a pillow easily, but has a little more style.

Decide what dimension case and how much fabric you will need: Double these values if you are producing two pillowcases.
Standard Case: 21″ x 32″: You’ll need about one yard of 45″ fabric for every pillow
Queen: 21″ x 36″:: You’ll need about 1 . 1 back yards of 45″ fabric for each pillow
King Case: 21″ x 42″:: You’ll need about 1 . 3 back yards of 45″ fabric for each cushion

Think about the pattern of the fabric if you are estimating how much you need. You may need more than these amounts if the pattern direction (up/down, right left) makes a difference. If direction makes a difference, you may achieve the look you want by cutting two edges of fabric for the pillow and sewing them together (not the same dimension you just cut). For example , if you cut the long side, you may sew the short sides jointly. For pillows and other bedding, 100 % cotton fabric is definitely preferred for comfort.

For Common Pillowcases:
Cut out your fabric.
Standard Case: Cut 2 pieces 45″ x 36″.
Queen Case: Cut 2 pieces 45″ x 40″.
King Case: Cut 2 pieces 45″ x 46″

Fold the fabric in half along with right sides together, and sew up two sides. Turn the particular pillow right-side-out. Fold the unsewn edge 1/2″ down toward the interior of the pillowcase.
When you loved this information and you would like to receive details with regards to Mammoth Imaging i implore you to visit the web page.
Press it to put the edge. Then fold the edge below again about 3″ and push (so that no raw sides are showing). Iron and sew along the inner edge of the 3″ flap.

For Envelope Pillowcases:
The particular instructions are similar, except that rather than folding the fabric in half, you will sew a hem on both finishes of your fabric (on the short dimension). Then, place your pillow to-be-covered on the strip, approximately in the centre. Fold the ends of the material over the pillow, and mark in which the pillow edge is (with a chalk or pin). Remove the pillow. Place the fabric print side dealing with you on a floor or table. Fold the ends toward the middle so that your marks are on the edges. One hemmed edge will be beneath the other (this is correct). Sew the top and bottom seams. (if you want to have an extra decorative advantage, allow for extra material on the ends of the pillow)

Flip the pillowcase inside out. Stuff with your pillow.

To make it slightly fancier, you can do an additional seam around the edges after you flip the particular pillowcase out. This requires the extra material around all edges, as mentioned above.

Curtains:
Curtains are so easy which you probably don’t need instructions. Fundamentally, you will measure the window and get sufficient fabric to cover it. You will need to pay attention to fabric pattern direction when price your fabric (up/down, left/right). You may put a large hem on the top for the curtain rod to go through, and a smaller sized hem for the bottom of the curtain.

There are ways to make no-sew curtains with iron-on seam binding, but curtains made this way are not very durable.

Another idea for attaching the curtains to the rods is by using eyelets and shower curtain hangers (wire type). You can get decorated shower curtain hangers in a lot of different styles.

Bedspread Cover:
One bit of tips is that you can get comforters with Character designs on them for less money compared to if you bought fabric and sewed covers yourself. If you are going to make them yourself, try to find sheets in the personality print you want. Sew up three sides and part of the fourth (the last side should be one of the short sides). Put either buttons or velcro on the opening in order to close the cover after you put a plain comforter or blanket inside.

A simpler idea is to just get fleece within the character print you like. The fleece jacket blanket will be able to be used to cuddle up to watch TV or sit outside as well, and it can be folded plus placed on the foot of the mattress when the weather is warmer.

Wall structure Hangings:
This could be achieved in many ways. One of the ways is to create a simple quilt using pre-made quilt squares in the characters of your choice. People are making “I Spy” quilts these days, which are quilts made with lots of different patterns and no strong color squares. These are very vibrant and fun to look at.

You also can find wall hanging kits that have every thing to make the wall hanging. This is a good way to go also.

Another simple way is very dependent on the fabric you find. If the print pattern is very large, you might be able to make a hanging out of a basic fabric panel.
Another idea is to use a plain color for a background, plus use cut out figures as appliques. You could have quite a character party this way!

Leave a Reply

Your email address will not be published. Required fields are marked *